The installation directions known as to mate the Scosche CR02B wire harness adapter to the Jensen harness utilizing solder and warmth shrink. Now, I have accessibility to that things, but what a soreness. So I went to Radio Shack and bought a 274-680 and built the connection utilizing only a screw driver. This Chrysler put in package package will allow for installation of a Solitary din radio in the PT Cruiser. It is built to have a manufacturing facility in good shape and finish. This radio package is built with the buyer in head and comes with a incredibly extensive guide with comprehensive directions for setting up a radio in your Chrysler.
oHigh quality Abdominal muscles plastic.
oComprehensive instruction guide.
oAll needed components to put in.
oAn aftermarket radio Recessed Din Mount.
oSpecial structure accommodates DIN, DIN pullout, and removing in a position confront DIN radios.
oDesigned to Bolt precisely to OEM radio mounting positions.
This harness will continue to keep your manufacturing facility speakers operating so you will not have to re-wire.
Also involved in this package is the Chrysler Antenna adapter which permits you to use your manufacturing facility AM/FM Antenna with your new radio.
It adapts the tiny antenna to the large found in all aftermarket radios.
What We Have to have:
•wiring adapter package
Set up Steps for radio in PT Cruiser
If you are setting up a PT Cruiser radio with an iPod jack, be absolutely sure to decide on up a patch wire, much too.
In most automobiles you will have to operate your way towards the PT Cruiser radio by removing trim panels.
If you have a repair service guide, check to see what is concerned in removing the PT Cruiser radio in your automobile.
You may well be shocked at how quite a few panels need to be removed to get to the radio, but continue to keep at it.
The trim panels will be held on by screws for the most portion.
Some of the screws may well not be as obvious or obvious as other people.
Also, some parts may well be hooked up utilizing a style of press-screw which is just pulled out of its socket.
After you have removed all of the trim encompassing the stereo, you are going to eliminate the old stereo as an assembly, a unit that includes the stereo alone and a mounting bracket.
You may possibly have a coin tray underneath the stereo that will occur out at the very same time.
With the bracket assembly out, you need to eliminate the old radio from it.
It will be held collectively by a set of screws, generally in the facet of the unit. Get rid of these screws and the old stereo really should slide proper out.
If your stereo sits atop a coin tray, you may well or may well not have to eliminate the tray at the very same time.
Don’t worry if you consider it off and then notice you did not have to. As long as you do not split something it’s going to go back again with ease.
You may possibly request by yourself, how do I plug my mp3 player into my PT? Simple.
Don’t screw the new radio into the bracket just nonetheless. It can be time to get started the wiring approach.
Since you were being clever (weren’t you?!) and purchased the wiring adapter with your radio, all you have to do is connect the new stereo’s wiring harness to the adapter, and it truly is plug-and-enjoy.
To connect the stereo’s harness to your adapter, you are going to need to strip the wires and crimp the connections.
Never put in a new radio utilizing only electrical tape or individuals twist-on style connectors used in house wiring. These usually are not acceptable or secure approaches to continue to keep automotive wiring in location.
You can ground the radio by locating a screw underneath there to connect this wire to.
If your PT is like most and has a ground wire for the radio by now, just lower the connector off and crimp it to the adapter harness.
Once you have all of your electrical connections built, go in advance and plug the adapter into the car’s wiring harness.
 Then plug the radio alone in for a exam operate. It may well seem foolish, but the worst time to locate out about a wiring concern is soon after you have re-mounted all of individuals trim panels!
The radio is effective. Now all you need to do is set the new stereo into the bracket. It really should have holes in the facet just like your old unit did.
 Use the screws that arrived with the new radio, they will be correctly sized.
Once it truly is in, snap the trim plate onto the outdoors.
You need to do is plug the wiring harness back again into the radio and set the assembly back again into location.
 Just before you shove everything in, try out to arrange the wires so that they will not be crimped by something when you press the new radio into the hole.
If you do, you may possibly be rewarded with an further percussion section within your PT as all of individuals panels get started to vibrate!
A phrase about the radio installation package you are about to put in. There are quite a few makers of radio installation kits for this automobile. Just about every manufacturer makes somewhat distinctive versions of the very same package, and a number of make specific kits for unique automobiles. The pictured installation package shown in the illustrations beneath is a regular package used for quite a few. Radio installation kits improve with the design and a long time of generation of the automobile. When choosing a package for this automobile, make absolutely sure the package you obtain states on the package the installation package will operate with your automobile design and year. Some kits may well involve further setup. Specified kits may well be multi perform kits built to operate with several automobiles and may well involve the installer to eliminate split away screw mounting tabs hooked up to the package that are not required for your particular automobile.